Main incomer
Real-time electricity consumption, demand tracking, power quality, and load forecasting.
Administrative / Healthcare
Every system monitored. Every alert routed. Every record kept.
A complete facility monitoring platform built for healthcare — covering electrical infrastructure, medical gas systems, clinical environments, temperature-sensitive storage, building services, and 24/7 critical alerting.
Hospital systems covered from plant room to clinical area
Zimanergy organizes critical hospital infrastructure into clear operational domains, helping engineering, clinical engineering, infection control, and pharmacy teams see the records they need without losing context.
1 — Electrical infrastructure
Sub-user electricity by department
Per ward, per department, per clinical area. Cost allocation, anomaly detection, and audit-ready consumption records.
Critical power circuits
ICU, OR, life-support. Continuous monitoring. Any interruption triggers immediate alerts.
Emergency generator monitoring
Real-time load, power output, and efficiency. Runtime tracking, load factor, and fault detection.
UPS monitoring
State-of-charge, load, and fault monitoring. Alerts when a UPS switches to battery or capacity drops.
Diesel fuel tank level and forecast
Continuous metering with forecast-to-empty. Multi-level alert thresholds.
Emergency power switchover validation
Timestamped record of every event: utility interruption, generator start, load transfer. Immutable compliance log.
Solar generation
Real-time generation, self-consumption, and grid export monitoring.
2 — Medical gas systems
Medical oxygen (O2)
Pressure monitoring at manifold, pipeline, and ward outlets. Low-pressure alerts with configurable thresholds per area.
Nitrous oxide (N2O)
Pressure and flow at manifold and delivery points. Usage tracking for inventory and regulatory compliance.
Medical air
Compressor output pressure, pipeline, and outlet monitoring. Compressor run-time and fault detection.
Vacuum / suction
Pump run-time and suction pressure monitoring. Low-vacuum alerts and pump fault detection.
CO2 and N2
Pressure monitoring for CO2 (endoscopy, laparoscopy) and N2 (surgical tools, cryogenics).
3 — Clinical environment conditions
Patient ward temperature and humidity
Continuous monitoring per ward and room, tracked against clinical standards. Alerts for HVAC faults or deviations.
Operating room positive pressure
Differential pressure confirms OR maintains positive pressure vs. adjacent corridors. Immediate alert if threshold drops.
Isolation room negative pressure
Confirms room draws air inward — preventing airborne pathogen spread. Continuous logging for infection control.
Sterile processing and clean room
Differential pressure, temperature, and humidity in sterile processing and ISO-classified clean rooms.
CO monitoring — parking
Continuous CO monitoring with immediate alert and regulatory compliance logging.
4 — Temperature-sensitive storage
Blood bank refrigeration
+2 to +6 degrees C continuous monitoring. Immediate alert on excursion. Full temperature history for blood product traceability.
Platelet incubators
+20 to +24 degrees C monitoring with agitation status. Excursion alerting with timestamped records.
Pharmacy and medication refrigerators
Temperature monitoring for all refrigerated medication storage — ward fridges, cold rooms, and temperature-sensitive drugs.
Vaccine refrigerators
Continuous monitoring for cold chain compliance. Excursion alerts with full event logs.
Laboratory and specimen storage
Temperature monitoring for refrigerators, freezers (-20C), and ultra-low freezers (-80C).
5 — Building services
Boiler optimization and monitoring
Gas consumption, firing cycles, and efficiency. Fault detection through consumption signature analysis.
Chiller and cooling plant
Power consumption and efficiency monitoring. Fault detection through power draw anomalies.
Elevator monitoring
Trips, runtime, and energy per trip. Anomaly detection critical in a facility where elevator failure affects patient transport.
Water pump monitoring
Power draw and runtime for domestic hot water, fire suppression, and process water pumps.
Hot water temperature (Legionella)
Continuous monitoring at calorifiers and sentinel outlets. Records compliance with 60C anti-Legionella threshold.
6 — Alerting and compliance
24/7 critical alerting
All critical events route immediately to the designated on-call engineering or clinical engineering contact.
Escalation paths
If an alert is not acknowledged within a configurable window, it escalates automatically to the next contact.
Continuous compliance logging
Immutable timestamped records for accreditation submissions, regulatory inspections, insurance, and root-cause analysis.
Role-based dashboard access
Engineers, clinical engineers, infection control, and pharmacy access only their relevant systems.
Frequently asked questions
What electrical circuits are classified as critical?
Any circuit the facility designates — ICU supply, OR feeds, ventilator circuits, dialysis, radiology, and life-support rooms. Each is monitored for continuity, voltage, and load. Any interruption triggers an immediate timestamped alert.
How does emergency power switchover validation work?
The moment utility supply is interrupted, the platform records the timestamp. Generator start signal, engine ready state, and load transfer completion time are all stored as an immutable event record for regulatory and insurance purposes.
Which medical gas parameters are monitored?
Pressure at the manifold and pipeline network, flow rate where sensors are installed, and delivery pressure at zone valve boxes. Each gas has configurable alert thresholds per clinical area.
How are blood bank refrigerators monitored?
Each unit is connected to a temperature sensor and monitored continuously against its required range. Any excursion triggers an immediate alert. The full temperature history is available for product traceability and cold chain compliance documentation.
How does OR positive pressure monitoring work?
A differential pressure sensor measures the pressure difference between the OR and adjacent corridor. If OR pressure drops, an immediate alert is sent and the event is logged with timestamp and duration.
Can compliance logs be used for accreditation submissions?
Yes. All records are continuous, timestamped, and immutable. They can be exported for regulatory inspections, accreditation audits, internal governance reporting, and root-cause analysis.
How are alerts routed at late hours?
Alert routing is configurable by system type, severity, and time of day. On-call contacts for electrical engineering, clinical engineering, pharmacy, and infection control can be set independently with escalation if unacknowledged.
See the hospital monitoring dashboard
Request a demo covering critical power, medical gas, and clinical environment monitoring.
Request a demo